 |
 |
|
Ati Radeon Graphics Driver |
|
|
|
|
|
|
| IGP 340 at Thinkpad R40 |
|
|
By s_d - Posted on June 24, 2004 - 12:54:08 (#13011)
Current version when comment was posted: 4.1 |
|
|
It even starts with built-in flatpanel. Kind of.
Very slowly, though. Mouse cursor appears on screen, then, in about 5-10 minutes (2 GHz Celeron!) it draws shapes of folders and deskbar. Mostly white on black, but there are some others dark colors present, like dark-red-cyan, dark green. Tried to press PrtScr, but no screen*tga appeared in home folder in reasonable time. At last it all freezed.
Btw, i wondering if having setting file with gfx_mem_size in kernel/drivers may help, but i didn't see such preference file for Radeon driver (as it was for i810, nvidia and matrox)
|
|
| RE: Mobility Fire GL? |
|
|
By dudenz - Posted on June 22, 2004 - 02:11:09 (#12986)
Current version when comment was posted: 4.1 |
|
|
I have an IBM ThinkPad R50p.
IBM has about 3 models or so with this card.
|
|
| Mobility Fire GL? |
|
|
By Jess - Posted on June 21, 2004 - 23:08:39 (#12983)
Current version when comment was posted: 4.1 |
|
|
I didnt realize ATI made a "mobile" version of the Fire GL's. What kind of laptop or "system" do you have that your running a CGI/Pro development card in it.
|
|
| ATI Mobility Fire GL T2 |
|
|
By dudenz - Posted on June 21, 2004 - 22:07:31 (#12982)
Current version when comment was posted: 4.1 |
|
|
hi,
are there any new enlightments on the problem with my FireGL T2 (0x4e54)?
with the newest driver-version the lowest third of my screen shows some neongreen lines and in the the upper third there are 2 little squares of some graphical distortion, but nothing to identify.
and the system hangs itself - there is no reaction what so ever.
anyhow thanks for your work.
dudenz
|
|
| Re: Radeon7000 VE and new driver: great! |
|
|
By topical - Posted on June 21, 2004 - 11:30:29 (#12979)
Current version when comment was posted: 4.1 |
|
|
That's interesting: I thought that support of _all_ Radeon7000VE were broken. Could you please send me the PCI ID of your card?
ICM-support: I have no clue about ICM and I think that there may even be copyright issues, so I cannot really tell you whether ICM is possible, but I'll take a look.
|
|
| Radeon 9100 and DVI |
|
|
By vercu - Posted on June 20, 2004 - 22:48:38 (#12975)
Current version when comment was posted: 4.1 |
|
|
I send the syslog by mail to you.
During install of Zeta RC3 i found out that the never driver work via DVI up to 800x600,
only higher resolutions don't work
|
|
| Radeon7000 VE and new driver: great! |
|
|
By Hugh - Posted on June 19, 2004 - 01:34:45 (#12967)
Current version when comment was posted: 4.1 |
|
|
Well my gf is away ATM, so I had the chance to try out dualhead-support with 2 LCDs and the new driver (also worked with the old one) :^))
@MYOB: I have no probs here with dualhead - one LCD is connected via DVI (Acer AL712), the other (Eizo) is connected via VGA.
However the picture looks better under XP on the DVI-connected Acer... must be the color-profile
@topical: any chance you hack in ICM-support? :^)
Regarding my initial question, I was just wondering if it would be of any use for RadeonVE-owners like me to upgrade, but I had no probs with the old version.
Thanks for a great (dual-)driver... oh my, I wish I could work with 2 monitors all the time, I could really get used to that;)
|
|
| Radeon 9100 and DVI |
|
|
By topical - Posted on June 18, 2004 - 16:15:37 (#12958)
Current version when comment was posted: 4.1 |
|
|
That's interesting: I got only positive replies in terms of DVI previuosly. Could you please narrow down the first version that makes trouble and send me the syslog using v4.1 (I posted instructions for that in TalkBack)? That would be nice.
|
|
| Radeon 7500 |
|
|
By topical - Posted on June 18, 2004 - 15:34:19 (#12956)
Current version when comment was posted: 4.1 |
|
|
A fix for the DualHead bug is on its way.
|
|
| Radeon Screen |
|
|
By topical - Posted on June 18, 2004 - 15:32:59 (#12955)
Current version when comment was posted: 4.1 |
|
|
It seems that I put the Dano version into the package (again!). Until I update the package (I have no BeOS at hands right now) please download a previous driver version to pinch its Radeon Screen program.
|
|
| Same problem |
|
|
By Remy - Posted on June 17, 2004 - 23:02:21 (#12944)
Current version when comment was posted: 4.1 |
|
|
Same problem as esteve with my All In Wonder 7500 card
|
|
| DVI Problem with Radeon 9100 |
|
|
By vercu - Posted on June 17, 2004 - 20:35:15 (#12943)
Current version when comment was posted: 4.1 |
|
|
Newer versions do not work with DVI on Radeon 9100 Card ID 514d.
RadeonDriver_v3.2.8 (and 3.2.7 from Zeta RC2) works perfect up to 1024x769.
A TFT is connected via DVI. Tested with BeOS and Zeta on the same machine.
The driver works without a problem when the VGA Port is used even in higher resolutions.
It would be nice if you can look at this. Thanks for your fantastic work on this driver.
|
|
| problems, |
|
|
By esteve - Posted on June 17, 2004 - 20:02:48 (#12942)
Current version when comment was posted: 4.1 |
|
|
I can't open Radeon Screen. There is a message:
Could not open "Radeon Screen" (Missing symbol:ReadyToLoop__7BLooperPQ27BLooper10loop_state).What happens?
|
|
| Radeon 7000 VE |
|
|
By MYOB - Posted on June 17, 2004 - 00:49:15 (#12923)
Current version when comment was posted: 4.1 |
|
|
The dualhead doesn't work on ID 5159, thats whats wrong with them.
|
|
| Again BeOS 5.1 build of RadeonScreen:( |
|
|
By s_d - Posted on June 17, 2004 - 00:22:13 (#12922)
Current version when comment was posted: 4.1 |
|
|
..."UISettingsChanged"...
|
|
| Radeon 7000VE |
|
|
By topical - Posted on June 16, 2004 - 22:29:31 (#12915)
Current version when comment was posted: 4.1 |
|
|
Sorry if I forgot, but: what is the problem with this card?
|
|
| Any changes for Radeon7000-users? |
|
|
By Hugh - Posted on June 16, 2004 - 21:40:06 (#12913)
Current version when comment was posted: 4.1 |
|
|
Great to see this driver progressing! Maybe I should get a new ATI-card someday;) Are there any fixes/changes for plain old RadeonVE (7000)-owners like me?
Thanks for all the work you put into this fine driver,
Hugh
|
|
| 9600XT -Extreme w00ties |
|
|
By vanne - Posted on June 3, 2004 - 05:34:12 (#12678)
Current version when comment was posted: 3.3.1 |
|
|
this driver works just great with the GexCube Ati 9600XT - Extreme :)
one thing though, the link it places in the prefs panel (control panel) isnt correct. just relink it from /boot/apps
cheers and good work :)
|
|
| IGP support and Radeon 9200 Mobility problems |
|
|
By topical - Posted on May 19, 2004 - 16:59:41 (#12494)
Current version when comment was posted: 3.3.1 |
|
|
I wasn't able to have a further look at these problems during the last two weeks because of lack of time, so please be patient until I can manage to dig into these problems again.
|
|
| Re: Regarding the Radeon Mobility 9600/9700 |
|
|
By topical - Posted on May 19, 2004 - 16:56:56 (#12493)
Current version when comment was posted: 3.3.1 |
|
|
If you have a Laptop with a built-in flatpanel or an external flatpanel connected via DVI, the driver automatically detects its native resolution and adds it to the list of available resolutions, i.e. it can be choosen in the Screen Preferences Panel and with any other program too (e.g. my laptop has 1400x1050, so the driver publishes this resolution too).
One warning about this, though: you shouldn't use these non-standard resolutions with CRTs (in my case: don't choose 1400x1050 if an external monitor is connected) - their timing is TFT-specific (so called Reduced Timing) and some CRTs don't like that!
|
|
| There should be a guide to install.... |
|
|
By Jess - Posted on May 18, 2004 - 18:20:24 (#12488)
Current version when comment was posted: 3.3.1 |
|
|
There should be a read me & if I remmeber there is an installation script as well. If you have to do it manually you move the files not execute them, they are drivers aside from the radeon preferences panel so the system executes them not you. move them to your boot/home/config/add-ons/kernel/drivers/bin then make a link of that bin once it is in place in the /boot/home/config/add-ons/kernel/drivers/dev/graphics folder. Then move the acelerant to the /boot/home/config/add-ons/accelerants folder, reboot...
|
|
| how to install bin's ??? |
|
|
By xor6 - Posted on May 18, 2004 - 08:58:55 (#12486)
Current version when comment was posted: 3.3.1 |
|
|
Hi everyone !
Thomas sent me some files (apparently bin's). I've tried to execute them in the shell but it's not working. Anyone knows how to install binary files ?
Or maybe I've misunderstood something ?
Thanks,
|
|
| AGP 8500 Radeon (Ql) |
|
|
By kraton. - Posted on May 14, 2004 - 14:00:37 (#12442)
Current version when comment was posted: 3.3.1 |
|
|
sorry i updated to 3.3.1 and it is working
|
|
| Radeon Ql 8500 on Gigabyte MB and BeMax, Dev and Dano. |
|
|
By kraton. - Posted on May 14, 2004 - 13:58:23 (#12441)
Current version when comment was posted: 3.3.1 |
|
|
I updated the driver from 3.2.6 to 3.2.8 and luckyly after more than 2years finally it is working for me.
Thank you.
Bruno
|
|
| @llama |
|
|
By trasnam - Posted on May 14, 2004 - 00:53:35 (#12440)
Current version when comment was posted: 3.3.1 |
|
|
I was able to obtain a syslog by hooking up the external monitor and booting as far as it would go, then looking at the syslog later by booting up in fail-safe video mode. Perhaps that will not work for all laptops, but it worked for me. This syslog wasn't overly verbose, so for completeness, I sent Thomas a syslog that was obtained by hooking up a null modem cable between the laptop with the IGP Radeon and another BeOS computer running SerialConnect. This hardware debug output was much more complete, and as such, I sent it to Thomas.
Thomas looked at this output and didn't notice anything wrong except for the fact that no IRQ is assigned to my video. Perhaps this has something to do with the problem. You may want to boot up in fail-safe video mode and see if there is no IRQ assigned to your VGA as well.
|
|
| Regarding the Radeon Mobility 9600/9700 |
|
|
By GenesisDH - Posted on May 13, 2004 - 18:23:46 (#12437)
Current version when comment was posted: 3.3.1 |
|
|
Howdy,
Has anybody that has been using this driver on a Radeon Mobility 9600 or 9700 chipset, with a widescreen TFT, been able to get a widescreen display size?
Would there be someway to somehow create such non-standard display sizes for not just this, but on other display devices using any of the other chipsets. Since I haven't really used any of the OpenBeOS version of the display panel, I wouldn't know if that is possible. They used to have a program for set non-standard displays, but it I believe was for Pre-BeOS5.
I'm trying to find a laptop with the Radeon Mobility 9700, but with a standard size screen just in case.
Thanks for continuing to make BeOS and Zeta even better to use.
Dave Haas
|
|
| @transam117 |
|
|
By llama - Posted on May 11, 2004 - 05:00:00 (#12421)
Current version when comment was posted: 3.3.1 |
|
|
Hi there,
Just wondering if you managed to get your syslog output to Thomas? I tried the trick with the external monitor but it made no difference to me, still crashes before syslog gets written.
Cheers,
Andrew
|
|
| About Laptop and 9200... |
|
|
By cvincent - Posted on May 10, 2004 - 16:55:47 (#12408)
Current version when comment was posted: 3.3.1 |
|
|
Hi,
Have you some good news ? At this time i can't use the laptop (due to frequensies problems)
I can help you to test version of driver to commit them !!!
Regards,
CKJ - Vincent Cedric
|
|
| ATI Radeon IGP 345M on my Laptop |
|
|
By EuskoGudari - Posted on May 5, 2004 - 15:47:24 (#12323)
Current version when comment was posted: 3.3.1 |
|
|
i have a problem, the drivers shown on the bebits page makes my laptop to see with bad colors and half speed. the driver is generic for ATI Radeon, but i can't make it work, i tried changing the resolution, the color depth, and nothing happened....
could you help me?
thanks in beforehand
|
|
| Radeon Mobility 9200 info |
|
|
By zivan56 - Posted on May 2, 2004 - 00:10:44 (#12288)
Current version when comment was posted: 3.3.1 |
|
|
Device Type : Display Controler (VGA)
Base : 3 Subtype 0 Interface : 0
Vendor : ATI Technologies (0x1002)
Card ID: 5c61
The card id is for the Radeon Moblity 9200 64mb (M9+ I think?)
I will e-mail you the bios.
|
|
| Re: IGP340 |
|
|
By llama - Posted on May 1, 2004 - 01:40:27 (#12276)
Current version when comment was posted: 3.3.1 |
|
|
Same story here with ram, I only have 256MB and my graphics uses 16MB. BeOS sees 240MB, so it doesn't look like there's a collision.
I'll try the external monitor trick to try and get a syslog output.
Cheers,
Andrew
|
|
| Re: IGP 340 |
|
|
By trasnam - Posted on May 1, 2004 - 00:33:27 (#12274)
Current version when comment was posted: 3.3.1 |
|
|
BeOS (Zeta in my particular case) sees the proper amount of RAM, so there is no collision. At least this applies on my Compaq 2170US laptop with the most recent firmware.
For example, I have 512 MB of RAM, and if I allocate 64 MB of RAM to the video in the BIOS, the BeOS sees 458752 KB, which is the correct RAM amount of 448 MB (512 minus 64).
I tried every other RAM allocation setting, and the "About Box" showed the proper amount in every case.
That's all I have for now.
|
|
| IGP 340 |
|
|
By topical - Posted on April 30, 2004 - 22:51:28 (#12272)
Current version when comment was posted: 3.3.1 |
|
|
This sounds like the memory reserved for graphics is used as normal memory too. Could you please check how much memory BeOS sees? If it's the same as total memory, we have a collision.
|
|
| Regarding IGP 340 (PCI ID: 4337) |
|
|
By trasnam - Posted on April 30, 2004 - 19:51:28 (#12271)
Current version when comment was posted: 3.3.1 |
|
|
I have noticed the same thing happen as llama (See topic "Still no joy") while using Zeta. However, I have made another observation. If I plug in an external monitor and then try booting, I can get Zeta to at least partially boot up. Without plugging in the external monitor, the computer just freezes up after the last boot icon, and no syslog is written. But with the external monitor plugged in, the boot gets far enough into the OS that I can see my background (which is the wrong color and has lots of bars, etc running through it). Fortunately in this case however, a syslog is written. I plan on providing a syslog later tonight, as that should be helpful in resolving the issue. Also, I'll send a copy of my vgabios.bin too. I plan on picking up a null modem cable tonight, so perhaps I can get some information from that as well.
Oh yeah, and one last thing. I noticed that by changing the amount of RAM available to the IGP (8, 16, 32, 64, 128MB, or auto), the "crash display" is somewhat different for each case. Not sure if this has anything to do with the issue, but I found it somewhat odd.
- trans
|
|
| IGP 320 test. |
|
|
By s_d - Posted on April 30, 2004 - 19:01:06 (#12269)
Current version when comment was posted: 3.3.1 |
|
|
(16 MB Video enabled form total laptop RAM).
At app_server start screen goes almost white, then red-white, then screen of darkness start to cover laptop
display from top to bottom.
|
|
| answer to leo_the_lion333... |
|
|
By cvincent - Posted on April 30, 2004 - 17:27:04 (#12268)
Current version when comment was posted: 3.3.1 |
|
|
Hi,
I think you have not understand where you have posted your talkback, here on www.bebits.com that's only speaking about BeOS system, we don't want to know something about Micro$oft and win... Please go to ask on a forum realted on your OS !!
|
|
| ATI Radeon 9000 Causes my Laptop to Crash! |
|
|
By leo_the_lion333 - Posted on April 30, 2004 - 17:20:47 (#12267)
Current version when comment was posted: 3.3.1 |
|
|
For some reason, when I was happily playing a video game (NHL2004), my laptop froze. Upon a manual reboot, a blue screen came up saying it was dumping my physical memory...then the Windows Logo is seen as Windows is trying to load. Then it asks me if I want to start in Safe Mode or not.
If I start normally, my computer automatically reboots and I'm back to the memory dump.
If I go into safe mode, WinXP Pro gave me a system error saying that there was something wrong with my video graphics drivers. If I remove my ATI Radeon 9000 driver, I am able to restart Windows in normal mode, but with a default VGA driver there. Everytime I try to re-install ATI Radeon 9000 drivers, the next time I cannot start windows normally. I can only do so when I uninstall Radeon 9000 drivers in Safe Mode.
With the default video card, when I drag windows around or scroll up and down (i.e. in Internet Explorer), the pages refresh slow and it's very choppy and very annoying!)
Would anyone know how I can go about re-installing my Radeon 9000 drivers without having my system crash? Do I need to re-install Windows?
THANKS!!!!
|
|
| 9200 laptop problem.. |
|
|
By cvincent - Posted on April 30, 2004 - 14:57:09 (#12264)
Current version when comment was posted: 3.3.1 |
|
|
The laptop is a Compaq nx7010.
But that's i feel strange is why it's work when is connected on External TFT ? the problem is linked with the laptop TFT screen ?
|
|
| IGP 340 |
|
|
By topical - Posted on April 30, 2004 - 14:27:59 (#12263)
Current version when comment was posted: 3.3.1 |
|
|
I received a report that things become better if BeOS is started from Win98, i.e. it seems that this chipset needs some more initialization that I haven't found out yet.
|
|
| about 9200 problem... |
|
|
By cvincent - Posted on April 30, 2004 - 13:59:42 (#12261)
Current version when comment was posted: 3.3.1 |
|
|
Hi,
Can you give a version where we can Set manually the frequences ?
thx, my syslog help you or not ?
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 |
| |
Recent Downloads - # 2
Total Downloads - # 2
Total Views - # 2
User Ratings - # 629
|
|
|
|
 |
| |
Video Drivers
|
|
|
|
 |
|
1. BePodder - 9.80
2. QEMU - 9.68
3. ScummVM - 9.57
4. cpu_fix - 9.42
5. Jukebox - 9.40
6. libdl.so - 9.40
7. Haiku AGP busm... - 9.35
8. vim6 - 9.31
9. Beezer - 9.26
10. HandBrake - 9.25
|
|
|
|
 |
|
1. BeOS 5 Perso... - 13,562
2. Realtek RTL8... - 13,091
3. Ati Radeon G... - 12,550
4. Ensoniq Audio... - 7,539
5. ATI Rage 128... - 7,435
6. USB Joystick... - 5,648
7. Broadcom 440x... - 5,400
8. S3 Trio 64 v2... - 4,710
9. USB Serial dr... - 4,704
10. Intel Extreme... - 4,462
|
|
|
|
 |
| You are not logged in.
Login
|
|
|
|
 |
|
