BeBits - wm3b2200bg - Talkback

BeBits

wm3b2200bg

Talkback

Go back to the wm3b2200bg page

Post a new Talkback comment!

Help needed for my card

By IgRussell - Posted on November 25, 2007 - 14:25:36 (#22141)
Current version when comment was posted: 0.0.6

Hi,
I use Zeta 1.21 and can connect to my WEP stuff without problems, but as soon as I enter any address, Zeta disconnects and cannot reconnect to the network. Works fine in the open. I installed this and same results, can somebody help me? Could it be caused by the issue described here?

Tell him to post it here

By IgRussell - Posted on October 2, 2007 - 12:38:23 (#21992)
Current version when comment was posted: 0.0.6

Tell him to post it here so everyone can download it.

Re: Wrong Device ID

By rainman - Posted on October 2, 2007 - 12:19:35 (#21991)
Current version when comment was posted: 0.0.6

Thank you for that info, Philippe. I finally got around to contacting the developer. He sent me a new driver and firmware, and it works great. In fact, I'm using it to type this right now.

Re: Wrong Device ID

By Philippe Houdoin - Posted on September 19, 2007 - 15:30:19 (#21958)
Current version when comment was posted: 0.0.6

It seems your card is the newest Intel PRO/Wireless 2915ABG MiniPCI Adapter.
It's supposed to be backward compatible with older versions, in particular the device ID 4220.
Did you try to contact the BeOS driver author to ask him if he can add support for this device ID?
Otherwise, patching the binary file so he recognize 4223 as a 4220 can be an option, but it's not for the faint heart...

Wrong Device ID

By rainman - Posted on September 19, 2007 - 00:39:00 (#21956)
Current version when comment was posted: 0.0.6

I have an Intel Pro/Wireless 2200 card, but I can't get BeOS to recognize it. It seems that my card's device id is 8086:4223, while the driver looks for 8086:4220. Does anyone know how I could get the driver to accept my card?

problem not in driver...

By cvincent - Posted on May 27, 2006 - 14:58:23 (#19888)
Current version when comment was posted: 0.0.6

Hi,

I think i'm no alone having a Acer Laptop, and this driver is loaded and work but i can't have wifi, because on the laptop i have a button i need to switch on, a driver exist on linux but not at this time on BeOS.

Re: Works, but

By tqh - Posted on May 27, 2006 - 08:59:26 (#19884)
Current version when comment was posted: 0.0.6

I'd suspect that as well.
I've always had problems with this driver under BeOS. I even switched router now to Apple Airport Extreme, but it's even harder to get it to connect under BeOS.

Works great under Windows though.

Works, but ...

By Das Jott - Posted on May 23, 2006 - 12:05:18 (#19816)
Current version when comment was posted: 0.0.6

Recently I installed R5 again, just to play around with it a little. Usually I use ZETA.
In ZETA wifi works great, although a little unstable once in a while, using its ndis driver for wifi.

I installed the driver under R5 exactly like described in the (really great!) manual in the package.

This driver works great in a range of 5m around my router. So I could also just plug a cable in...

Maybe this driver causes the card to work on a very low power?

Nevertheless, great work so far!
Regards
Das Jott

Re: HPUX735

By kancept - Posted on May 13, 2005 - 10:08:15 (#16615)
Current version when comment was posted: 0.0.5

Have you looked at this website? It's not released yet, but it's almost there. He's done a lot of work on it. Soon...

http://blog.petterhj.net/

Development help?

By hpux735 - Posted on May 13, 2005 - 00:36:49 (#16613)
Current version when comment was posted: 0.0.5

Hey, I'm very happy to see this driver and it works (usually...) on my system. I'd like to have a more userfriendly way to interface with it. If you would like an interface developed let me know about hooks in the code that would support that, or maybe access to the source so that I cn work on it.

Thanks!

Development help?

By hpux735 - Posted on May 13, 2005 - 00:36:07 (#16612)
Current version when comment was posted: 0.0.5

Hey, I'm very happy to see this driver and it works (usually...) on my system. I'd like to have a more userfriendly way to interface with it. If you would like an interface developed let me know about hooks in the code that would support that, or maybe access to the source so that I cn work on it.

Thanks!

Works on Dell Inspiron 600m w/ 2200bg

By burnttaco - Posted on May 6, 2005 - 16:49:15 (#16536)
Current version when comment was posted: 0.0.5

I followed the direction exactly and it came up just fine w/ 128bit encrypt. Using a WRT54GP2(Besy buy vonage router w/ a phone line). Have to be fairly close though or i loose signal for some reason. Is there an option in the properties to increase mW ?

802.11 b/g PCI/USB

By Stas Maximov - Posted on May 3, 2005 - 06:57:36 (#16480)
Current version when comment was posted: 0.0.5

I'd like to second pmvn. I'd be happy to invest into this to get 802.11 b/g PCI/USB working.

Thanks.

re:; f355fan

By tqh - Posted on March 31, 2005 - 05:10:15 (#16251)
Current version when comment was posted: 0.0.5

Same for me, as long as I do one boot to windows first startup it works dunno if it's different without wep.

By nutela - Posted on March 31, 2005 - 05:00:05 (#16250)
Current version when comment was posted: 0.0.5

"If you want to help to enhance this driver and to support more hardware you can make a donation using Paypal. Thank you."

Hi Patrick, I wondered what is for you a reasonable amount to get you going for a 802.11 G PCI/USB driver?

Thanks

Centrino wireless in Dell Inspiron 600m

By f355fan - Posted on March 30, 2005 - 17:17:15 (#16244)
Current version when comment was posted: 0.0.5

I'm using a Dell Inspiron 600m with the internal Intel 2200bg wireless, and it seems to be working great so far.

I was having trouble getting WEP working. But once I tried warm booting from Windows into BeOS, everything magically started working.

Thanks for the excellent work on the driver.

x31 works great

By maddocks - Posted on March 8, 2005 - 13:18:19 (#16094)
Current version when comment was posted: 0.0.5

I run phos on a x31. It works flawlessly. Your a gentleman and a scholar. Yes I had to hack the bios for this card to work. Big blue is chilly and chilly aint never been cool

working on gateway 3520

By shatty - Posted on February 18, 2005 - 02:35:21 (#15885)
Current version when comment was posted: 0.0.5

This driver works fine for me on the gateway 3520,
which has integrated intel 2200. It was necessary
to install the firmware, after which I had no
problems on my net server beos. I am using DHCP
to get IP, DNS, etc. from my wireless router.
Another win for patrick!

works here!

By xeD - Posted on January 27, 2005 - 10:16:40 (#15596)
Current version when comment was posted: 0.0.5

Hi,
I'm posting with my wireless laptop :)

Many thanks for your work!
The driver works good here with Zeta Neo ( w/ SP1)
Keep up your great projects!

Ciao

RE: RE: KDL with Dell 8600C

By ljr - Posted on January 23, 2005 - 16:57:45 (#15532)
Current version when comment was posted: 0.0.5

Update test with 0.5 version but same problems.

I tried also to remove media_server in bootscript and now beos stops to hang. But Wifi isn't useable (i desactivate any security to avoid a configuration problem). It seems there's still an IRQ problem :
KERN 'idle thread 1'[1]: wm3b2200bg: device_interrupt_notification scan complete type 0x0e count 14 status 0x01
KERN 'ifconfig'[281]: wm3b2200bg: scan complete
KERN 'ifconfig'[281]: wm3b2200bg: command essid monwifiamoi
KERN 'ifconfig'[281]: wm3b2200bg: command rates type 0
KERN 'ifconfig'[281]: wm3b2200bg: command sensitivity 0
KERN 'ifconfig'[281]: wm3b2200bg: command associate
KERN 'ifconfig'[281]: wm3b2200bg: device_control initialization
KERN 'ifconfig'[281]: wm3b2200bg: device_control mac address
KERN 'ifconfig'[281]: wm3b2200bg: device_control frame size (1514)
KERN 'ifconfig'[281]: wm3b2200bg: device_control unknown operand (0x2717)
KERN 'ifconfig'[281]: wm3b2200bg: device_interrupt fatal error

The device uses IRQ11 with VGA,SOUND,USBx4,ETH (bcm440x)....

By wiese66 - Posted on January 23, 2005 - 13:20:20 (#15530)
Current version when comment was posted: 0.0.5

Hi Patrick,

just tried your driver under Zeta Neo. I got also a Acer wlmi 4002. I found out that ifconfig doesn´t show the MAC adress of the card. After a restart, I got also in KDL with the message about an not return IRQ (AFAIK) in thread ifconfig. Maybe your timeout for reading out the MAC-No. is to large? If you could use it, I´ll make a picture of the stacktrace for you and mail it to you.

Greetings,
Chris

KDL with Dell 8600C

By ljr - Posted on January 12, 2005 - 17:15:27 (#15388)
Current version when comment was posted: 0.0.4

Hi Patrick,

I'm back with a new portable and i try to use the Intel 2200 pci card included. But in vain. It goes in kdl when media server starts (i think, the sounds should play the beos start wav at this time).

Any idea ?

KDL as well

By DaaT - Posted on January 3, 2005 - 04:38:45 (#15256)
Current version when comment was posted: 0.0.4

Hi Patrick,

Thanks for the driver, but unfortunately it took me to KDL as Neo was booting. I don't have a pic of it though, I might take one with my camera later today and send it to you.

This happens on my Acer 4002WLMi with the Intel 2200BG mini-pci. I'm at work so can't check the device/vendor ID atm. For now i'm using the laptop wired connected to the cable modem but hopefully later this week i'm getting a Linksys wireless router, so I'm hoping i'll be able to use your driver, sooner or later :)

Take care,
DaaT

KDL, more info

By 7 - Posted on December 28, 2004 - 19:10:06 (#15207)
Current version when comment was posted: 0.0.4

I have a 'screen shot' of the KDL if you would like it. I had though that it was failing perhaps because I didn't install the firmware files, but this was not the case, I got the KDL anyway.

The kdl starts with user_ioctl, and ends with device_open.

Anyway, if you want, email me (voidref@gmail.com) and I will send you the screen shot (it's about 970 kb).

KDL

By 7 - Posted on December 28, 2004 - 18:27:57 (#15206)
Current version when comment was posted: 0.0.4

I tried this driver on my Sony A series laptop, and get a KDL as soon as ifconfig tries to 'up' the interface. This is on Zeta, is this a known problem, or is there some data I can give to help out?

Thanks!
Alan

By nutela - Posted on December 13, 2004 - 10:34:01 (#15041)
Current version when comment was posted: 0.0.4

Not tried it yet but now I have an idea which wificards to buy for use with my ADSL router. Yipi!

thx

By atomozero - Posted on December 11, 2004 - 09:35:08 (#15020)
Current version when comment was posted: 0.0.4

GRAZIE!!!

Thanx!!!

By animerules - Posted on December 10, 2004 - 21:13:39 (#15014)
Current version when comment was posted: 0.0.4

Will the Mini PCI card work on a desktop pc or will it only work on a laptop?

By Sokrates - Posted on December 10, 2004 - 19:53:09 (#15013)
Current version when comment was posted: 0.0.4

Thanks a lot for this driver; Very importent thing cause many NBs have this standard. Mine got the older Intel® PRO/Wireless LAN 2100. This doesen't work :-(. I like a newser NB for using WLAN on BeOS.

Thanks Nils













			Recent Downloads - # 16 Total Downloads - # 188 Total Views - # 181 User Ratings - # 559




			Network Drivers




			1. BePodder - 9.80 2. QEMU - 9.68 3. ScummVM - 9.57 4. cpu_fix - 9.42 5. Jukebox - 9.40 6. libdl.so - 9.40 7. Haiku AGP busm... - 9.35 8. vim6 - 9.31 9. Beezer - 9.26 10. HandBrake - 9.25




			1. BeOS 5 Perso... - 13,023 2. Realtek RTL8... - 12,761 3. Ati Radeon G... - 11,975 4. ATI Rage 128... - 7,213 5. Ensoniq Audio... - 7,182 6. USB Joystick... - 5,401 7. Broadcom 440x... - 5,202 8. USB Serial dr... - 4,609 9. S3 Trio 64 v2... - 4,485 10. Intel Extreme... - 4,318




			You are not logged in. Login


	Unless otherwise noted, everything is copyright © 1999-2009 Haikuware. All Rights Reserved. For more legal trivia, take a gander at our Legal Stuff page and our Privacy Statement.